TeSys D contactor - 3P - <= 440 V - 38 A AC-3 - 24...60 V AC/DC coil - LC1D38BNE
IDR2,180,000.00
In stock
SKU
LC1D38BNE
PRE ORDER
Duration Pre-Order : 30
Duration Pre-Order : 30
TeSys D contactor, 3 poles (3NO), for motor control applications up to 38A/690V AC-3 (18.5kW@400V). It provides a low consumption 24-60V AC/DC coil with electronic control for direct PLC output connection, 1NO+1NC built-in auxiliary contacts (NC mirror certified), connection by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability. Compact (45mm width), DIN-rail mounting or screw fixing. Multi standards certified (IEC, UL, CSA, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).
| range of product | TeSys D |
|---|---|
| product or component type | contactor |
| range | TeSys |
| device short name | LC1D, LC1D38 |
| [Uc] control circuit voltage | 24...60 V AC 50/60 Hz, 24...60 V DC |
| pole contact composition | 3 NO |
| operating time | 20...90 ms opening, 45...55 ms closing |
| [Ie] rated operational current | 38 A (at <60 °C) at <= 440 V AC-3 for power circuit, 50 A (at <60 °C) at <= 440 V AC-1 for power circuit |
| utilisation category | AC-1, AC-3 |
| [Ue] rated operational voltage | power circuit: <= 690 V AC 25...400 Hz |
| control circuit type | AC/DC at 50/60 Hz AC/DC electronic |
| poles description | 3P |
| contactor application | motor control, resistive load |
| product name | TeSys D Green |
| maximum operating rate | 3600 cyc/h 60 °C |
| mechanical durability | 15 Mcycles |
| product certifications | CCC, CSA, DNV-GL, EAC, KC, LROS (Lloyds register of shipping), UL |
| power dissipation per pole | 3 W AC-3, 5 W AC-1 |
| average impedance | 2 mOhm - Ith 50 A 50 Hz for power circuit |
| auxiliary contact composition | 1 NO + 1 NC |
| [Ith] conventional free air thermal current | 10 A (at 60 °C) for signalling circuit, 50 A (at 60 °C) for power circuit |
| mounting support | plate, rail |
| standards | CSA C22.2 No 60947-4-1, EN/IEC 60947-4-1, EN/IEC 60947-5-1, UL 60947-4-1 |
| safety reliability level | B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1, B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 |
| rated breaking capacity | 550 A at 440 V for power circuit conforming to IEC 60947 |
| Irms rated making capacity | 140 A AC for signalling circuit conforming to IEC 60947-5-1, 250 A DC for signalling circuit conforming to IEC 60947-5-1, 550 A at 440 V for power circuit conforming to IEC 60947 |
| associated fuse rating | 10 A gG for signalling circuit conforming to IEC 60947-5-1, 63 A gG at <= 690 V coordination type 1 for power circuit, 63 A gG at <= 690 V coordination type 2 for power circuit |
| [Uimp] rated impulse withstand voltage | 6 kV conforming to IEC 60947 |
| connections - terminals | control circuit: screw clamp terminals 1 cable(s) 1-4 mm²flexible with cable end, control circuit: screw clamp terminals 1 cable(s) 1-4 mm²flexible without cable end, control circuit: screw clamp terminals 1 cable(s) 1-4 mm²solid, control circuit: screw clamp terminals 2 cable(s) 1-2.5 mm²flexible with cable end, control circuit: screw clamp terminals 2 cable(s) 1-4 mm²flexible without cable end, control circuit: screw clamp terminals 2 cable(s) 1-4 mm²solid, power circuit: screw clamp terminals 1 cable(s) 1-10 mm²flexible with cable end, power circuit: screw clamp terminals 1 cable(s) 1.5-10 mm²solid, power circuit: screw clamp terminals 1 cable(s) 2.5-10 mm²flexible without cable end, power circuit: screw clamp terminals 2 cable(s) 1.5-6 mm²flexible with cable end, power circuit: screw clamp terminals 2 cable(s) 2.5-10 mm²flexible without cable end, power circuit: screw clamp terminals 2 cable(s) 2.5-10 mm²solid |
| tightening torque | control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm, control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver Philips No 2, power circuit: 2.5 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm, power circuit: 2.5 N.m - on screw clamp terminals - with screwdriver Philips No 2 |
| electrical durability | 0.9 Mcycles 50 A AC-1 at Ue <= 440 V, 1.8 Mcycles 35 A AC-3 at Ue <= 440 V |
| overvoltage category | III |
| motor power kW | 18.5 kW at 380...400 V AC 50 Hz (AC-3), 18.5 kW at 415 V AC 50 Hz (AC-3), 18.5 kW at 440 V AC 50 Hz (AC-3), 18.5 kW at 500 V AC 50 Hz (AC-3), 18.5 kW at 660...690 V AC 50 Hz (AC-3), 9 kW at 220...230 V AC 50 Hz (AC-3) |
| motor power hp | 10 hp at 200/208 V AC 60 Hz for 3 phases motors, 10 hp at 230/240 V AC 60 Hz for 3 phases motors, 2 hp at 115 V AC 60 Hz for 1 phase motors, 20 hp at 460/480 V AC 60 Hz for 3 phases motors, 25 hp at 575/600 V AC 60 Hz for 3 phases motors, 5 hp at 230/240 V AC 60 Hz for 1 phase motors |
| [Ui] rated insulation voltage | power circuit: 690 V conforming to IEC 60947-4-1, signalling circuit: 690 V conforming to IEC 60947-1 |
| [Icw] rated short-time withstand current | 100 A - 1 s for signalling circuit, 120 A - 500 ms for signalling circuit, 140 A - 100 ms for signalling circuit, 150 A 40 °C - 1 min for power circuit, 310 A 40 °C - 10 s for power circuit, 430 A 40 °C - 1 s for power circuit, 60 A 40 °C - 10 min for power circuit |
| protective cover | with |
| coil type | AC/DC electronic |
Write Your Own Review
