TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 95 A - 24 V DC standard coil - LC1D95BD
IDR4,963,400.00
In stock
SKU
LC1D95BD
PRE ORDER
Duration Pre-Order : 30
Duration Pre-Order : 30
TeSys D contactor, 3 poles (3NO), for motor control applications up to 95A/1000V AC-3 (45kW@400V). It provides a 24V DC coil, 1NO+1NC built-in auxiliary contacts, power connections by screw terminals and control by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability. Compact (85mm width), DIN-rail mounting or screw fixing. Multi standards certified (IEC, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh).
| range of product | TeSys D |
|---|---|
| product or component type | contactor |
| range | TeSys |
| device short name | LC1D |
| [Uc] control circuit voltage | 24 V DC |
| pole contact composition | 3 NO |
| operating time | 20...35 ms opening, 95...130 ms closing |
| [Ie] rated operational current | 125 A (at <60 °C) at <= 690 V AC-1 for power circuit, 95 A (at <60 °C) at <= 440 V AC-3 for power circuit |
| utilisation category | AC-1, AC-3, AC-4 |
| [Ue] rated operational voltage | power circuit: 1000 V AC 25...400 Hz |
| control circuit type | DC standard |
| poles description | 3P |
| contactor application | motor control, resistive load |
| product name | TeSys D |
| maximum operating rate | 3600 cyc/h 60 °C |
| mechanical durability | 10 Mcycles |
| product certifications | BV, CCC, DNV-GL, EAC, IECEE CB Scheme, LROS (Lloyds register of shipping), RINA |
| power dissipation per pole | 12.5 W AC-1, 7.2 W AC-3 |
| average impedance | 0.8 mOhm - Ith 125 A 50 Hz for power circuit |
| auxiliary contact composition | 1 NO + 1 NC |
| [Ith] conventional free air thermal current | 10 A (at 60 °C) for signalling circuit, 125 A (at 60 °C) for power circuit |
| mounting support | plate, rail |
| standards | EN/IEC 60947-1, EN/IEC 60947-4-1, EN/IEC 60947-5-1, GB/T 14048.4 |
| safety reliability level | B10d = 1.3 Mcycles contactor with nominal load conforming to EN/ISO 13849-1, B10d = 20 Mcycles contactor with mechanical load conforming to EN/ISO 13849-1 |
| rated breaking capacity | 1100 A at 440 V for power circuit conforming to IEC 60947 |
| Irms rated making capacity | 1100 A at 440 V AC for power circuit conforming to IEC 60947, 140 A AC for signalling circuit conforming to IEC 60947-5-1, 250 A DC for signalling circuit conforming to IEC 60947-5-1 |
| associated fuse rating | 10 A gG for signalling circuit conforming to IEC 60947-5-1, 160 A gG at <= 690 V coordination type 2 for power circuit, 200 A gG at <= 690 V coordination type 1 for power circuit |
| [Uimp] rated impulse withstand voltage | 8 kV conforming to IEC 60947 |
| connections - terminals | control circuit: screw clamp terminals 1 cable(s) 1-2.5 mm²flexible with cable end, control circuit: screw clamp terminals 1 cable(s) 1-4 mm²flexible without cable end, control circuit: screw clamp terminals 1 cable(s) 1-4 mm²solid without cable end, control circuit: screw clamp terminals 2 cable(s) 1-2.5 mm²flexible with cable end, control circuit: screw clamp terminals 2 cable(s) 1-4 mm²flexible without cable end, control circuit: screw clamp terminals 2 cable(s) 1-4 mm²solid without cable end, power circuit: connector 1 cable(s) 4-50 mm²flexible with cable end, power circuit: connector 1 cable(s) 4-50 mm²flexible without cable end, power circuit: connector 1 cable(s) 4-50 mm²solid without cable end, power circuit: connector 2 cable(s) 4-16 mm²flexible with cable end, power circuit: connector 2 cable(s) 4-25 mm²flexible without cable end, power circuit: connector 2 cable(s) 4-25 mm²solid without cable end |
| tightening torque | control circuit: 1.2 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm, control circuit: 1.2 N.m - on screw clamp terminals - with screwdriver Philips No 2, power circuit: 12 N.m - on connector - with screwdriver flat Ø 6 to Ø 8 mm, power circuit: 12 N.m - on connector hexagonal screw head 4 mm |
| electrical durability | 1.2 Mcycles 95 A AC-3, 1.3 Mcycles 125 A AC-1 |
| overvoltage category | III |
| motor power kW | 25 kW at 220...230 V AC 50 Hz (AC-3), 45 kW at 1000 V AC 50 Hz (AC-3), 45 kW at 380...400 V AC 50 Hz (AC-3), 45 kW at 415...440 V AC 50 Hz (AC-3), 45 kW at 660...690 V AC 50 Hz (AC-3), 55 kW at 500 V AC 50 Hz (AC-3) |
| motor power hp | 15 hp at 230/240 V AC 60 Hz for 1 phase motors, 25 hp at 200/208 V AC 60 Hz for 3 phases motors, 30 hp at 230/240 V AC 60 Hz for 3 phases motors, 60 hp at 460/480 V AC 60 Hz for 3 phases motors, 60 hp at 575/600 V AC 60 Hz for 3 phases motors, 7.5 hp at 115 V AC 60 Hz for 1 phase motors |
| [Ui] rated insulation voltage | power circuit: 1000 V conforming to IEC 60947-4-1, signalling circuit: 690 V conforming to IEC 60947-1 |
| [Icw] rated short-time withstand current | 100 A - 1 s for signalling circuit, 1100 A 40 °C - 1 s for power circuit, 120 A - 500 ms for signalling circuit, 135 A 40 °C - 10 min for power circuit, 140 A - 100 ms for signalling circuit, 400 A 40 °C - 1 min for power circuit, 800 A 40 °C - 10 s for power circuit |
| protective cover | with |
Write Your Own Review
