Acti 9 iPRD20r modular surge arrester - 3P + N - 350V - with remote transfert - A9L20601
IDR2,187,900.00
In stock
SKU
A9L20601
PRE ORDER
Duration Pre-Order : 30
Duration Pre-Order : 30
This Acti9 iPRD20r surge arrester protects 3P+N installations. it allows quick replacement of damaged cartridges. This Type 2 device is recommended for medium risk level and incoming panel board. It offers remote reporting of the "cartridge must be changed" message. It can be turned over to allow the phase/neutral/earth cables to enter through either the top or the bottom. The associated circuit breaker Isc breaking capacity can go up to 50kA. It is compatible with TT and TN-S earthing system. The Imax rated discharge current is up to 40kA. The In nominal discharge current is 15kA. The Uc maximum continuous operating voltage in differential mode (between phase and neutral) is 350VAC. The Uc maximum continuous operating voltage in common mode (between neutral and earth) is 260VAC. The Up maximum voltage protection level is 1.4kV in common mode and 1.2kV in differential mode. The Un rated service voltage is 230VAC or 400VAC. The operating frequency is 50Hz or 60Hz. The dimensions are (W) 72mm x (H) 85mm x (D) 69mm. The width in 9mm pitches is 8. The weight is 450g. The degree of protection is IP20 and IP40 in modular enclosure. The operating temperature is -25°C to 60°C. The storage temperature is -40°C to 85°C. This product is compliant with EN 61643-11 and IEC 61643-11 standards.
range of product | iPRD |
---|---|
remote signalling | with |
surge arrester type | electrical distribution network |
poles description | 3P + N |
earthing system | TN-S, TT |
product or component type | surge arrester with pluggable cartridge |
product name | Acti 9 iPRD |
device application | distribution |
device short name | iPRD20r |
range | Acti 9 |
signal contacts composition | 1 SD (1 C/O) |
Write Your Own Review