Acti 9 - Auxiliary contact alarm SD ac dc - A9N26927
IDR462,800.00
In stock
SKU
A9N26927
PRE ORDER
Duration Pre-Order : 30
Duration Pre-Order : 30
This Acti 9 SD electric auxiliary is a remote fault indicator contact. It is dedicated to Acti 9 C120, C60H-DC, DPN N Vigi. It comes with 1 changeover contact indicating the position of the associated device. It indicates the position of the associated device in the event of electrical fault or action on the tripping auxiliary. The width in 9mm pitches is 1. The Ue rated operational voltage is 24VAC to 415VAC or 24VDC to 130VDC. The operating frequency is 50Hz or 60Hz. The Ie rated operational current is 6A under 24VDC, 2A under 48VDC, 1.5A under 60VDC, 1A under 130VDC. The Ie rated operational current is 6A under 24VAC to 240VAC, 3A under 415VAC. There is a mechanical state indicator and a test function button on the front face. Be careful, this device is not compatible with an ID residual current circuit breaker. The operating temperature is -25°C to + 50°C. The storage temperature is -40°C to + 85°C. This product complies with IEC/EN 60947-5-1 standard and EN 62019-2 standard only for C120.
| range of product | C120, C60, Clario, DPN, DPN Vigi, I-NA, ID, Librio, ProDis |
|---|---|
| product or component type | fault contact |
| range | Acti 9, Clario, Librio, Prodis |
| device short name | SD |
| signal contacts composition | 1 C/O |
| [In] rated current | 1-1 A at 130 V DC, 1.5-1.5 A at 60 V DC, 2-2 A at 48 V DC, 3-3 A at 380...415 V AC - 50/60 Hz, 6-6 A at 220...240 V AC - 50/60 Hz, 6-6 A at 24 V DC |
| 9 mm pitches | 1 |
Write Your Own Review
