LOW VOLTAGE
Shop By
Now Shopping by
Shopping Options
- motor power kW 18.5 kW at 660...690 V AC 50/60 Hz (AC-3) Remove This Item
range of product
product or component type
range
device short name
[Uc] control circuit voltage
pole contact composition
operating time
[Ie] rated operational current
poles description
[Ith] conventional free air thermal current
product name
overvoltage category
standards
[Ue] rated operational voltage
control circuit type
contactor application
maximum operating rate
mechanical durability
product certifications
power dissipation per pole
average impedance
auxiliary contact composition
mounting support
safety reliability level
rated breaking capacity
Irms rated making capacity
associated fuse rating
[Uimp] rated impulse withstand voltage
connections - terminals
- control circuit: screw clamp terminals 1 cable(s) 1-4 mm²flexible with cable end4item
- control circuit: screw clamp terminals 1 cable(s) 1-4 mm²flexible without cable end4item
- control circuit: screw clamp terminals 1 cable(s) 1-4 mm²solid without cable end4item
- control circuit: screw clamp terminals 2 cable(s) 1-2.5 mm²flexible with cable end4item
- control circuit: screw clamp terminals 2 cable(s) 1-4 mm²flexible without cable end4item
- control circuit: screw clamp terminals 2 cable(s) 1-4 mm²solid without cable end4item
- power circuit: screw clamp terminals 1 cable(s) 1-10 mm²flexible with cable end4item
- power circuit: screw clamp terminals 1 cable(s) 1.5-10 mm²solid without cable end4item
- power circuit: screw clamp terminals 1 cable(s) 2.5-10 mm²flexible without cable end4item
- power circuit: screw clamp terminals 2 cable(s) 1.5-6 mm²flexible with cable end4item
- power circuit: screw clamp terminals 2 cable(s) 2.5-10 mm²flexible without cable end4item
- power circuit: screw clamp terminals 2 cable(s) 2.5-10 mm²solid without cable end4item
tightening torque
- control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm4item
- control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver Philips No 24item
- power circuit: 2.5 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm4item
- power circuit: 2.5 N.m - on screw clamp terminals - with screwdriver Philips No 24item
electrical durability
motor power hp
- 10 hp at 200/208 V AC 50/60 Hz for 3 phases motors2item
- 10 hp at 230/240 V AC 50/60 Hz for 3 phases motors4item
- 2 hp at 115 V AC 50/60 Hz for 1 phase motors2item
- 20 hp at 460/480 V AC 50/60 Hz for 3 phases motors2item
- 20 hp at 480 V AC 50/60 Hz for 3 phases motors2item
- 25 hp at 600 V AC 50/60 Hz for 3 phases motors2item
- 30 hp at 575/600 V AC 50/60 Hz for 3 phases motors2item
- 5 hp at 230/240 V AC 50/60 Hz for 1 phase motors2item
- 5 hp at 240 V AC 50/60 Hz for 1 phase motors2item
- 7.5 hp at 200/208 V AC 50/60 Hz for 3 phases motors2item
[Ui] rated insulation voltage
[Icw] rated short-time withstand current
- 100 A - 1 s for signalling circuit4item
- 120 A - 500 ms for signalling circuit4item
- 138 A 40 °C - 1 min for power circuit2item
- 140 A - 100 ms for signalling circuit4item
- 150 A 40 °C - 1 min for power circuit2item
- 260 A 40 °C - 10 s for power circuit2item
- 310 A 40 °C - 10 s for power circuit2item
- 430 A 40 °C - 1 s for power circuit4item
- 60 A 40 °C - 10 min for power circuit4item
protective cover
My Wish List